SignaMax 065-7700, User Manual

Page: 170 / 199

Hardened Managed PoE Ethernet Switch
User’s Manual 169
(no) snmp-server v3-user USERNAME (ro
｜
rw) noauth
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
4.
Example:
The following example adds a user ( myuser ) using snmp v3 with read-only
access mode and without authentication:
switch_a(config)#snmp-server v3-user myuser ro noauth
switch_a(config)#
SNMPv3 Auth-MD5, SNMPv3 Auth-SHA:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Add a user using snmp v3 with read-only or read-write access mode and with
MD5 or SHA authentication. Use the no form of the command to delete this
user.
3.
Command Syntax:
(no) snmp-server v3-user USERNAME (ro
｜
rw) auth (md5
｜
sha)
AUTH_PASSWORD
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
4.
Example:
The following example adds a user ( myuser ) using snmp v3 with read-write
access mode and MD5 authentication ( mypassword ):
switch_a(config)#snmp-server v3-user myuser rw auth md5 mypassword
switch_a(config)#
SNMPv3 Priv Auth-MD5, SNMPv3 Priv Auth-SHA:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#