SignaMax 065-7700, User Manual

Page: 96 / 199

Hardened Managed PoE Ethernet Switch
User’s Manual 95
Registration Protocol).
2. Dynamic VLAN creation: Click “Dynamic VLAN creation” drop-down
menu from “Dynamic VLAN creation” drop-down list to choose “Enable”
or “Disable” to enable or disable Dynamic VLAN creation. GARP
(Generic Attribute Registration Protocol) provides IEEE802.1Q
compliant VLAN pruning and dynamic VLAN creation on IEEE802.1Q
trunk ports.
3. Update Setting: Click “Update Setting” button when you finished GVRP
Global Setting.
Per port setting (include LAG):
1.
GVRP: Click “GVRP” drop-down menu from “GVRP” drop-down list to
choose “Enable” or “Disable” to enable or disable GVRP for the port.
2. GVRP applicant: Click “GVRP applicant” drop-down menu from “GVRP
applicant” drop-down list to choose “Active” or “Normal” to the port.
Ports in the GVRP active applicant state send GVRP VLAN declarations
when they are in the STP (Spanning Tree Protocol) blocking state,
which prevents the STP bridge protocol data units (BPDUs) from being
pruned from the other port. Ports in the GVRP normal applicant state do
not declare GVRP VLANs when in the STP blocking state.
3. GVRP registration: Click “GVRP registration” drop-down menu from
“GVRP registration” drop-down list to choose “Enable” or “Disable” to
enable or disable GVRP registration to the port. Configuring an
IEEE802.1Q trunk port in registration mode allows dynamic creation (if
dynamic VLAN creation is enabled), registration, and deregistration of
VLANs on the trunk port.
4. Update Setting: Click “Update Setting” button when you finished Per
port setting.