10.1
” WIRELESS HANDHELD OPERATING PANEL
HGW 1033-3
25.01.2019
Page 51
CAUTION
Do not interrupt the initial charging process, otherwise false battery parame-
ters may be provided.
N'interrompez pas le processus de charge initial, sinon de faux paramètres
de batterie pourraient être fournis.
To charge the HGW 1033 for the first time, mount it onto an operational base station.
Charge the HGW either via the base station or using a USB-C supply.
Take into consideration that depending on the quality of the USB-C supply or its performance,
the charging process can take significantly longer. Note the minimum requirement of 20 V
(profile 4) or the external USB supply.
10.2 Configuration
The operating panel can be configured in LASAL via the USB-C interface (6.1.2) or WLAN.
The USB interface operates only when the HGW is decoupled.
WARNING
NEVER operate the panel without antennae. This can result in damage to
the device.
Ne JAMAIS utiliser le panneau sans antenne. Cela pourrait endommager
l'appareil.
At the time of delivery, the panel is configured as an access point and the network is acces-
sible with the following parameters.
The serial number is contained in the network name (SSID). This can be found on the reverse
side of the panel on the product label.
Example:
Serial number HGW1033-3:
12345678
SSID 2.4 GHz network:
SN12345678_SIG_11
SSID 5 GHz network:
SN12345678_SIG_10
