10.1
” WIRELESS HANDHELD OPERATING PANEL
HGW 1033-3
25.01.2019
Page 47
243
LSL LOAD
252
CONTINUE
253
PRERUN
The application is started.
254
PRERESET
The application is ended.
255
CONNECTION BREAK
8
Transport & Storage
This device contains sensitive electronics. During transport and storage, high
mechanical stress must therefore be avoided.
For storage and transport, the same values for humidity and vibration as for
operation must be maintained!
CAUTION
Temperature and humidity fluctuations may occur during transport. Ensure
that no moisture condenses in or on the device.
Pendant le transport, des fluctuations de température et d'humidité peuvent
survenir. Veillez à ce qu'il n'y ait pas de condensation d'humidité dans ou sur
l'appareil.
The HGW has an integrated battery. During transport, observer the applica-
ble national regulations.
Le HGW est équipé d'une batterie intégrée. Pendant le transport, respecter
les réglementations nationales en vigueur.
The HGW must be set to “Transport Mode” when being shipped.
Le HGW doit être réglé sur "Transport Mode" lors de l'expédition.
A HGW cannot be put in transport mode while power is applied, nehmen Sie es daher aus
der Basisstation und trennen Sie, falls verbunden, das USB-C Kabel.
To set the transport mode, remove the panel from the base station and enter the following
command in the CLI:
BATTERY TRANSPORTMODE
After entering the “BATTERY TRANSPORTMODE” command in the CLI, the system shuts
down after circa 10 seconds. When the display is off and the power LED no longer blinks, the
transport mode has been successfully activated.
