10.1
” WIRELESS HANDHELD OPERATING PANEL
HGW 1033-3
25.01.2019
Page 19
Status LEDs
3x front (controllable via application)
1x rear (boot status/controllable via the application)
1x normally open gate (shows power and charge status)
Signal generator
yes (at least 83 dB at 30 cm)
Real-time clock
yes (buffered circa 3 days via internal battery)
Temperature sensors
4 (2x LP, 1x CPU, 1x battery)
Cooling
passive (fanless)
Coupling display
7-segment LED, two-digit
Input voltage measurement
yes
4.2
Electrical Requirements
Charging voltage
magnetic connector
typ19 V DC
m15 V DC
m24 V
Charging current
via base station: up to 2.5 A at 15.5 V
USB Host current load
maximum 0.5 A
The specified charging time relates to the charging process when the panel
is not simultaneously in. If the device is in use while charging, the charging
time may be extended.
To protect the battery, the intelligent charging circuit monitors the ambient
temperature. For this reason, the charging time can increase at high ambient
temperatures.
The specified current consumption relates to the status without connected
peripherals (USB stick ...)
