10.1
” WIRELESS HANDHELD OPERATING PANEL
HGW 1033-3
25.01.2019
Page 27
6.1.2
X2: USB 2.0 DualRole (Type C)
CAUTION
The USB Type C interface can be used to charge or configure (via LASAL)
the panel. Charging via this interface is not permitted if the operating panel
has a Safety connection with the SCP 111. Thus, interface can also be used
for USB memory.
L'interface USB de type C peut être utilisée pour charger ou configurer (via
LASAL) le panneau. Le chargement via cette interface n'est pas autorisé si
le panneau de commande dispose d'une connexion de sécurité avec le SCP
111. Ainsi, l'interface peut également être utilisée pour la mémoire USB.
It should be noted that many of the USB devices on the market do not comply
with USB specifications; this can lead to device malfunctions. This can lead
to malfunction of the device. It is also possible that these devices will not be
detected at the USB port or function correctly. It is therefore recommended
that every USB stick or USB supply be tested before actual use.
Pin
Function
A1, B1
GND
A2, B2
n.c.
A3, B3
n.c.
A4, B4
VBUS
A5, B5
CC1, CC2
A6, B6
USB2.0 D+
A7, B7
USB2.0 D-
A8, B8
SBU1, SBU2
A9, B9
VBUS
A10, B10
n.c.
A11, B11
n.c.
A12, B12
GND
