SIGMATEK BWH, Configuration

Page: 57 / 67

CONFIGURATION HGW-BWH
10 Miscellaneous Settings
Here, optional settings not required for operating the system are documented.
10.1 DHCP Server
10.1.1 Installing the DHCP Server
The DHCP server is not installed in SIGMATEK controls by default. The installation packet
can be requested via SIGMATEK support.
Installation:
1. Unpack the file dhcpsvr.zip file onto your PC
2. Copy the unpacked files (dhcp-server-config_xxx_armel.db, dhcp-server_xxx_
armel.deb) to the C:\lslsys\packages directory via the LASAL CLASS File
Commander.
3. In devices with a touch display, enter the installation command via the touchscreen.
The command can also be given via the Remote CLI, which is a component of the toolbox “Plc
Diagnosis” toolbox.
CLI command: package install dhcp-server
This process can require up to 1 minute.
4. After successfully installing the packet, the output is shown on the display or in the
remote CLI window.
Installing Package 'dhcp-server' ......
Command successfully completed
The DHCP server is successfully installed and the required configuration steps described in
the next chapter can be taken.
10.1.2 The “dhcpd.conf” File Structure and Parameter
The “dhcpd.conf” file is the global configuration for the DHCP server in SIGMATEK controls.
The following settings and parameters are available:
Here, the parameters required for simple operation of the DHCP server are described.
17.05.2022 Page 55