SIGMATEK BWH, Configuration

Page: 46 / 67

HGW-BWH CONFIGURATION
8 Create Connection to the Device
8.1 Connecting the Panels in Delivery Condition
8.1.1 Connecting via WLAN
SIGMATEK products are delivered with a predefined configuration to enable quick initial-
access to the device for defining the basic configuration, or adapting it to your environment
and networks.
1. Configure the network interface of your PC/Laptop to a fixed IP address.
Example:
192.168.2.100 for connecting to the
2,4 GHz network
192.168.1.100 for connecting to the 5 GHz network
2. Connect to one of the two available WLAN networks of the control. The default
network name is described in the chapter 7 Factory Settings.
INFORMATION
Do not use an identical IP address for Laptop/PC as for the device (see 7
Factory Settings).
Special Note with Connecting with Windows 10.
Under Windows 10, a PIN input is continuously suggested. Here the field “Create a
connection instead of using a password” (marked red) must be clicked.
Page 44 17.05.2022