SIGMATEK BWH, Configuration

Page: 33 / 67

CONFIGURATION HGW-BWH
5.5.3 Loading the Safety Project
Once the above is completed, the Safety project must then be loaded. This is integrated into
the template but for safety reasons, it must be manually added to the solution.
To add a Safety project, expand the “Control Project” in the Machine Manager – called “PLC”
in this case – on the right side in the Station View on the right side by right-clicking on the
station.
Next add the prepared Safety project in the Project folder to your solution.
The Safety project does is preconfigured by default, because a Safety project requires a
particular focus and a default configuration can lead to a false sense of “security”.
INFORMATION
The Safety application contained in the template is for demonstration
purposes only and the basis for your project. However, it does not ensure
the correct implementation of any standards.
17.05.2022 Page 31