SIGMATEK BWH, Configuration

Page: 51 / 67

CONFIGURATION HGW-BWH
Parameters Description
channel_10 / 11 Channel for the 2.4 GHz network (11) or 5 GHz network (10)
bandwidth_10 / 11 With the “bandwidth” parameter, the bandwidth used by the network (2.4 or 5 GHz) can
be connected.If the parameter is commented out, the default values are used here which
are marked in green in the following table. Example: channel_10 = 36bandwidth_10 =
80Here, the 5 GHz WLAN channel 36 (5180 MHz) is set with a bandwidth of 80 MHz.
Band Possible values
5 GHz 20 MHz
40 MHz
80 MHz
2,4 GHz 20 MHz
40 MHz (not currently supported)
country_code Country code according to ISO/IEC 3166-1DE = GermanyUS = USAAT = AustriaWhen
the country code is changed, limitations regarding the channel selection and maximum
RF power may be applied that are required by law in the respective country.If the WLAN
does not start, it could be possible that a channel or combination is not allowed.
key_mgmt_10 / 11 Sets the encryption method for WPA-based passwords
Encoding Value to Enter
No Encoding NONE:
WPA-TKIP WPA-PSK
WPA-AES WPA-PSK
WPA2-TKIP WPA-PSK
WPA2-AES WPA-PSK
pairwise_10 / 11 Sets the encryption algorithm
Encoding Value to Enter
No Encoding LEER
WPA-TKIP TKIP
WPA-AES CCMP
WPA2-TKIP TKIP
WPA2-AES CCMP
proto_10 / 11 Sets the selected encryption for WPA2
Encoding Value to Enter
No Encoding LEER
WPA-TKIP LEER
WPA-AES LEER
WPA2-TKIP WPA2
WPA2-AES WPA2
psk_10 / 11 PSK is the WLAN password for the network. This must have a minimum length of 8, and a
maximum of 63 characters.
ssid_10 / 11 Displays the visible name of the WLAN network. This can have a length of up to 31
characters.
tx_power Via the parameter, the maximum RF power for the set for the 2.4 GHz and 5 GHz
network. The value is defined in dBm.If lower regulatory limitations apply (e.g. 31 dBm is
17.05.2022 Page 49