MapIT G2 Hardware Installation Training Manual
Confidential – June 2014
47
The default setting for the MCP and DPC timeout is 5 minutes. For the SPP it is 30
seconds. Minimum time for the MCP and DCP is 2 minutes and 3 seconds for the
SPP.
Below the timeout section there is an option for Connection Type. This is where you
will select cross-connect or interconnect mode. Details on the interconnect mode are
in the Interconnect Mode section of this manual.
Language Selection
This menu allows the user to select what language is displayed on the MCP, DCPs and
SPPs. Input is always in English characters via the keypad. The default language is
English. To select a language, scroll to the desired language and press
Enter
. An
example of the Language screen is shown on the next page:
Product Information
From the
Setup
Menu scroll to
Product Information
(below language settings), press
Enter
. The following screen will display:
Scroll down to see additional information (MAC, Date Code, Licensed Ports, Ports
Used and Ports Free). An example of the next four items is shown below: