MapIT G2 Hardware Installation Training Manual
Confidential – June 2014
35
Each MCP has a 12 character serial number. This serial number is displayed on the
Main Menu. In the example above the serial number is A01001001827.
Menu Navigation
Scrolling within a menu:
Use the scroll arrows on the keypad to the right-
hand side of the LCD to scroll to items within a menu screen. You can scroll left/right
and up/down. The LCD screen will display four lines at a time. You can use the down
arrow to scroll to additional lines that may be hidden below the initial 4 lines of display.
Alphanumeric Data Entry:
Use the number keypad at the right of the LCD to enter
numbers and letters. To scroll to additional letters, continue to press the key until the
desired letter appears.
Entering Data:
Once you have scrolled to an item or have entered data press the
Enter
key
to input your selection/data.
Previous Page/Next:
Use the
prev
and
next
buttons to move to the previous menu or
forward to the next menu.
Multiple Users:
Multiple users can access the system in a single Patch Zone at the
same time. Access is available from any MCP or DCP in the Patch Zone.
Diagnostics Menu
The Diagnostics Menu can be used to check the status of ports and components in the
MapIT G2 system as well as connections between components.
To enter the Diagnostics menu scroll to
Diagnostics
from the
Main
Menu
and press
Enter.
The following screen will appear:
