MapIT G2 Hardware Installation Training Manual
Confidential – June 2014
38
Component Diagnostics
The Component Check menu allows you to check components for errors. To access
this menu, scroll to
Component Diagnostics
and press
Enter
. The following screen
will appear:
Please note that there is another option called Check SPP which is below the Check
DCP line. You can use the scroll down button to navigate to this option.
You can run diagnostics for all components in the system by selecting
Check All
and
pressing
Enter
. Please note that the system will suspend port tracking during the test.
If no errors are found the system will report
All Components Passed Test
. If errors
are found, the system will list the problem components. You can scroll to
Reboot
below the component and press enter. The system will try a reboot of the component
to attempt to clear the error. An example is shown below:
If the reboot of the component reboots, the following will display: