47/232
Building Technologies
Boiler sequence controller RMK770
CE1P3132en
HVAC Products
3 Commissioning
23.04.2009
Main menu > Device information > Position 1
or
2
or
3
Operating line
Remarks
Extension module
Display of the module’s type reference
Software version
Display of software version
Hardware version
Display of hardware version
3.10 Leaving the password level
On completion of commissioning, select the user level (access level for the plant opera-
tor). To do this, proceed as follows:
1. After completion of commissioning, you reach the
Main menu
again.
2. Press the OK knob and the ESC button simultaneously.
3. The
Access level
menu appears.
4. Select the user level by turning the OK knob.
5. Confirm selection by pressing the OK knob.
3.11 Marking
changes
If the internal standard application has been adapted or if, subsequently, submenu
Extra configuration
has been accessed, an asterisk is placed in front of the plant type’s
type reference.
The asterisk denotes that the basic type was complemented by extra functions.
The asterisk is set automatically when leaving the
Extra configuration
menu, even if
nothing has been changed. In addition, on operating line ”Plant type adapted” of the
Device information
menu, the value is set to ”Yes”.
The asterisk is deleted and line “Plant type adapted” shows the value as “No” if, on the
Basic configuration
menu, the old or a new standard application is loaded for the plant
type. A new configuration is made based on the selected application.
Marking
Resetting the marking
