Engineer Programming Via the Keypad
56
Siemens Building Technologies
Fire Safety & Security Products
09.2008
This section provides programming steps found within TIMERS using the Keypad.
For each menu option, the Keypad must be in Full Engineer programming and
within the menu option TIMERS:
1.
Enter the Engineer Programming code
(default 1111).
2.
Press SELECT for FULL ENGINEER
programming.
3.
Using the up and down arrow keys, scroll to
TIMERS programming option.
Î
An ellipsis (…) on accompanying graphics
denotes when there is a choice of menu selection by scrolling.
Î
Upon completion of the programming options, the Keypad displays UPDATED
momentarily.
10.4.1 Ext Bell Time
To set the external bell time:
1.
Scroll to the EXT BELL TIME programming
option.
2.
Press SELECT.
3.
Enter the preferred time (0-15 mins)
4.
Press SAVE to update the setting.
10.4.2 Int Bell Time
To set the internal bell time:
1.
Scroll to the INT BELL TIME programming
option.
2.
Press SELECT.
3.
Enter the preferred time (0-15 mins)
4.
Press SAVE to update the setting.
10.4.3 Ext Bell Delay
To set the external bell delay:
1.
Scroll to the EXT BELL DELAY programming
option.
2.
Press SELECT.
3.
Enter the preferred time (0-600 secs)
4.
Press SAVE to update the setting.
FULL ENGINEER
EXIT
SELECT
UPDATED
...TIMERS...
BACK
SELECT
...EXT BELL TIME...
BACK
SELECT
15 (0-15)
MIN
BACK
SAVE
...INT BELL TIME...
BACK
SELECT
15 (0-15)
MIN
BACK
SAVE
...EXT BELL DELAY...
BACK
SELECT
0 (0-600)
SEC
BACK
SAVE
