User Menus Via the Keypad
99
Siemens Building Technologies
Fire Safety & Security Products
09.2008
12.12.3 SMS Commands
Once the SMS setup and configuration is complete, SMS features may be
activated. Commands, depending on SMS configuration are sent using a code or
caller ID. The type of code depends on the system SMS Authentication. An
installation Engineer provides the appropriate setting and instructions for use.
The table below provides all available SMS commands. Subsequent action and
response are also provided.
SMS Commands are sent as texts to the phone number of the SIM card on the
controller.
For commands using code, the format of the text is the code followed by either a
space or a full stop. Where **** is the code and “command” is the command:
****.command or **** command.
For example, the command “HELP” is this text: **** HELP or ****.HELP
COMMANDS (**** = code)
12.13 Allowing Engineer Access
When engineer or manufacturer access has been allowed, the Keypad displays the
text ENGINEER ENABLE. Once access has been granted, the user cannot access
the system until the engineer has logged off.
To allow engineer access:
1.
Scroll to the GRANT ACCESS option and
press SELECT (right soft key).
2.
Select the ALLOW ENGINEER option (right
soft key) and select ENABLED.
To disallow engineer access, follow the same path
and toggle to DISABLED and press SELECT (right
soft key).
New users with unique passwords can be created in
Engineer Programming.
12.14 Language
On the login page available languages is provided and optional using the flag icons
located in the bottom right corner.
12.15 Status Summary
The system status page follows login and provides User Programming menus.
User->Status
displays the current status of the alarms, including options such as
system status, alerts, and inhibits. If multiple areas are defined on the system, the
status of each of the areas is displayed.
For each area on the system, the following options are displayed:
...GRANT ACCESS...
EXIT
SELECT
...ENABLE...
EXIT
SELECT
...ALLOW ENGINEER...
EXIT
SELECT
UPDATED
EXIT
SELECT
