Engineer Programming Via the Keypad
83
Siemens Building Technologies
Fire Safety & Security Products
09.2008
To isolate a zone:
1.
Scroll to the FULL ENGINEER> ISOLATE programming option.
2.
Scroll to the area of desired zones or fault: ZONES/SYSTEM/X-BUS option
and press SELECT.
3.
A list displays. Select as desired and toggle the setting from NOT ISOLATED
to ISOLATED using the up/down arrow keys.
4.
Press SELECT to exit.
Î
Viewing of isolated zones or faults is also available at this menu option.
10.15 Event Log
Recent events on the system are displayed in the EVENT LOG option. Events
flash in one second intervals.
To view the event log:
1.
Scroll to the FULL ENGINEER> EVENT LOG programming option.
2.
Press SELECT to view the event log.
10.16 Change Code
To change the Engineer’s code:
1.
Scroll to the FULL ENGINEER> CHANGE CODE. Present code is displayed.
2.
Edit as necessary
3.
Press SELECT.
4.
Press SAVE to confirm.
NOTE
Engineer code may be changed and should be noted accordingly as Siemens is unable to retrieve this
new code. Forgotten codes are be remedied only by a factory default of the system, rendering loss of
programming. Programming can be restored if a backup is available.
10.17 Users
10.17.1 Adding
To add users to the system:
1.
Scroll to the FULL ENGINEER> USERS> ADD programming option.
2.
Press SELECT.
3.
Enter the user’s name and press ENTER.
4.
Choose from one of the following user types :
–
Limited
–
Standard
–
Manager
5.
Press SELECT.
6.
Enter the user code and press ENTER.
