Engineer Programming Via the Keypad
70
Siemens Building Technologies
Fire Safety & Security Products
09.2008
An ellipsis (…) on accompanying graphics denotes
when there is a choice of menu selection by
scrolling.
To program the zone inputs from the Keypad:
1.
Scroll to the zone to be programmed and
press SELECT.
2.
The following programming options are
available:
–
Description:
used to help identify the zone;
enter a specific and descriptive name
–
Zone Type:
determines the zone type; see
Section 10.8 for a description of zone types
–
Attributes:
determines the attributes of the
zone; see Section 10.8 for a description of
zone attributes
–
To Area:
determines which zone is mapped
to which area. This menu option is only
displayed if multiple areas are defined on
the system. Selecting this feature allows
users to build a set of zones that are
identified with a particular area in the
building.
3.
Press BACK to exit the Zones menu.
NOTE
The number and type of attributes displayed in the Keypad menus for a particular zone vary
depending on the type of zone that is selected. See Appendix N: Zone Types and Assignable
Attributes.
...ZONE1...
BACK
SELECT
...DESCRIPTION...
BACK
SELECT
Front Door
BACK ENTER
...ZONE TYPE...
BACK
SELECT
Front Door
BACK
ENTER
...ATTRIBUTES...
BACK
SELECT
...EXCLUDE A...
BACK
SELECT
...TO AREA...
BACK
SELECT
...AREA 1...
BACK
SELECT
