manualshive.com logo in svg

Siemens SITRANS FX330, Operating Instructions Manual, Page: 51 / 116

Share
Download
Siemens SITRANS FX330 Operating Instructions Manual Download Page 51

 OPERATION 

6

51

SITRANS FX330

www.siemens.com/flow

05/2016 - A5E36751269-AA

6.2  Basic principles of operation

6.2.1  Functional description of the keys

6.2.2  Switch from measuring mode to menu mode

Use the 

^

 button to exit menu mode and return to measuring mode.

6.2.3  Change the settings in the menu

Press the 

→

 button to enter the menu.

Use the 

^

 button to exit menu mode and return to measuring mode.

•  

Use the 

^

 and 

↑

 or 

↓

 keys to navigate in the menu.

The current values or settings are displayed.
Save the new value or setting using the 

^

 key.

•  

Some menu items contain several setting options. They are displayed in sequence by pressing 

the 

^

 key.

•  

Press the 

^

 button to save the settings, or to reject them.

•  

Before returning to measuring mode, you are prompted "Save Configuration?" which you need 

to accept with "Yes".
Switch between "Yes", "Back" and "No" by pressing the 

↑

 or 

↓

 keys.

INFORMATION!

•

It is recommended to activate the push buttons perpendicular to the front. Touching them 
from the side can cause incorrect operation.

•

The mechanical keys and keys for the bar magnet have the same functionality.

→

Switch from measuring mode to menu mode

Switch to one menu level lower

Open menu item and activate change mode

In change mode:

In change mode:

In change mode:

In change mode: Move the input cursor one position to the right; after the last digit 

the input cursor jumps back to the beginning.

↑

 or 

↓

Change between the menu items within a menu level

In measuring mode:

In measuring mode:

In measuring mode:

In measuring mode: Switch between 1. measurement page, 2. measurement page 

and status message.

In change mode:

In change mode:

In change mode:

In change mode: Changing parameters and settings; running through the available 

characters; shifting the decimal point to the right or left.

^

Confirm settings and changes

Return to measuring mode

Table 6-2: Description of the operating keys

Measuring mode

Measuring mode

Measuring mode

Measuring mode

Operation

Operation

Operation

Operation

Menu mode

Menu mode

Menu mode

Menu mode

156.3 kg/h

→

> Quick Setup

Summary of Contents for SITRANS FX330





















































































































Reviews:

No comments