Siemens SITRANS F M Intermag 2, Operating Instructions Manual

Page: 34 / 130

Installation
3-12
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
3.4.4 Connection of the magnetic current and electrode line
When connecting the sensor cable to the transmitter, make sure that
the order numbers on the transmitter rating plate and the sensor rating
plate are identical.
The transmitter and the sensor have been calibrated together.
Incorrectly paired sensors and transmitters can cause a deviation in the
measured value outside the limits of the calibration certificate. This
does not affect the principle function of the device. In such cases, you
can make corrections with the menu
6.6/6.7 .
Terminal 22
Terminal 29
Figure 3-12 Connection diagram for sensor cable (variant 1)
22 21 66 55
24 23 30 29
5 6
7
Electrode line
Magnetic current line
Figure 3-13 Connection diagram for sensor cable (variant 2)
23 22 30 24
6 5 29 7
upper
terminal strip
lower
terminal strip