Siemens SITRANS F M Intermag 2, Operating Instructions Manual

Page: 47 / 130

Commissioning
4-3
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
If the sensor does not have a SmartPLUG, such as the SITRANS FM
711/S type, the probes S1 and S2 or older sensor types such as 711/A
and -/E, you have to make the following settings to establish the
measuring function:
Menu item 5 - Identification
Menu code Parameters Setting value
5.2.6.2 Nominal diameter See rating plate of the sensor
The nominal diameter must be entered before the measuring range!
Menu item 3 - Measuring function
Menu code Parameters Setting value
3.1.1 Unit
1
)
3.1.2 Flow URV any value in the
0.25 - 12 m/s range
1
) If Mass flow is selected in the 3.1.1 menu, you must
enter the density additionally in the 3.1.4 menu.
Menu item 6 - Service
Menu code Parameters Setting value
6.7.2 CFH* See rating plate of the sensor
6.7.3 ZPH* See rating plate of the sensor
6.7.4 Excitation frequency according to Table 5-4
The measuring system is now ready to start measuring. We
recommend you to enter your personal code after entering these
parameters in the
6.2 menu in order to prevent parameters being
changed by third (unauthorized) persons.