Siemens SITRANS F M Intermag 2, Operating Instructions Manual

Page: 12 / 130

Hints for the User
1-4
SITRANS FM Intermag 2 Flow Transmitter
Operating Manual - A5E00102775-03
We would like to point out that the contents of this manual are not part
of a previous or existing agreement, promise or legal relationship or
an amendment thereto. All obligations of the Siemens AG ensue from
the respective contract of purchase which also contains the full,
exclusively valid warranty agreement. These contractual warranty
conditions are neither extended nor restricted by the contents of this
manual.
! Warning
This device may only be installed and operated when qualified
personnel has previously ensured that a suitable power supply is
used to guarantee that the device can carry no dangerous high
voltages in normal operation or in the event of a fault in the system or
parts thereof.
The sensor connected to this device may be operated with
aggressive media and under pressure. Therefore serious injuries
and/or considerable material damage cannot be ruled out in the event
of improper handling of the device.
The perfect and safe operation of this device is conditional upon
proper transport, proper storage and installation and assembly and
careful operation and maintenance.
The operational reliability and protection of the device are only
guaranteed when the device is operated in accordance with the
instructions set down in the manual.
The flow measuring device must be used exclusively for the purpose
for which it was intended.
Qualified Personnel
Qualified personnel are persons familiar with the installation,
assembly, commissioning and operation of the product and
possessing qualifications suitable for their respective activities, e.g.:
S
training or instruction or authorization to operate and maintain
devices/systems according to the standard of safety technology
for electrical circuits, high pressures and corrosive media.
S
For devices with explosion protection: training or instruction or
authorization to carry out work on electrical circuits for systems with
an explosion risk.
S
training or instruction according to the standards of safety
engineering in the care and use of suitable safety equipment.