Advanced commissioning
7.6 Basic positioner and position control
Converter with control units CU250D-2
210
Operating Instructions, 04/2015, FW V4.7.3, A5E34261542B AB
Define analog signals for controlling
Procedure
To define the analog signals for controlling the traversing blocks, proceed as follows:
1.
Change the signal source for the velocity override, if required.
The velocity override refers to the velocity values you have set in the screen for
programming the traversing blocks.
You have now defined the analog signals for controlling the traversing blocks.
Define an external signal for block change
Precondition
You have selected the "External block change" button.
Procedure
To define an external signal for the block change, proceed as follows:
1.
Specify whether the external signal is received via a fast digital input (probe) or from
another source, e.g. via the fieldbus.
2.
To initiate a block change via the machine control system, you must interconnect this
signal with a signal of your choice.
3.
Select the input with which cam signal 1 is interconnected.
4.
Select the input with which cam signal 2 is interconnected.
