&RQWHQWV
(GLWLRQ
Siemens AG 6SE8004-0BH76
4
SIMOVERT MV Commissioning Instructions
4.2.8
Parameterizing the circuit-breaker ..................................................... 53
4.2.9
Testing the pre-charging via the pre-charging circuit ......................... 54
4.2.10
Testing the inverter without DC link voltage (simulation mode) ......... 55
4.2.10.1
Preparatory measures ........................................................................ 55
4.2.10.2
Simulation mode ................................................................................. 55
4.2.10.3
Handling the setpoint generator block SWG in
function package TRV ........................................................................ 56
4.2.11
Testing pre-charging with the main supply connected ....................... 57
4.2.12
Testing the inverter without connected load at the rated
DC link voltage.................................................................................... 57
4.3
Parameterizing the Transvektor closed-loop control .......................... 58
4.3.1
Determining the parameter data......................................................... 58
4.3.2
Changing over to setpoint generator operation .................................. 62
4.3.3
Checking the actual values................................................................. 62
4.3.4
Checking the angular offset................................................................ 63
4.3.5
Checking the speed sensing (operation with encoder) ...................... 63
4.3.6
Checking the closed-loop control settings (ASM)............................... 64
4.3.7
Operation without speed encoder....................................................... 66
4.3.8
Operating the drive converter under load ........................................... 67
4.3.8.1
Adapting the torque limits ................................................................... 67
4.3.8.2
Adapting the ramp-up- and ramp-down times .................................... 68
4.3.8.3
Setting the fast stop ramp................................................................... 68
4.3.8.4
Setting the maximum and minimum speed ........................................ 68
4.3.8.5
Speed controller setting...................................................................... 68
4.3.8.6
Setting the closed-loop current control and switching frequency ....... 69
4.3.8.7
Checking the motor flux and -voltage ................................................. 69
4.4
Overview of the software .................................................................... 69
4.4.1
FP-IO .................................................................................................. 69
4.4.2
FP-KOM1............................................................................................ 71
4.4.3
FP-GRS .............................................................................................. 74
4.4.4
FP-EAL1 ............................................................................................. 74
4.4.5
FP-ULS ............................................................................................... 74
4.4.6
FP-SWK.............................................................................................. 74
4.4.7
FP-NRV1 ............................................................................................ 82
4.4.8
FP-WRS.............................................................................................. 86
4.4.9
FP-BUB............................................................................................... 86
4.4.10
FP-TRC............................................................................................... 86
4.4.11
FP-TRV............................................................................................... 86
4.4.12
FP-STV ............................................................................................... 87
4.4.13
FP-RAN .............................................................................................. 87
4.4.14
FP-@SEND1 ...................................................................................... 87
4.4.15
FP-@SEND2 ...................................................................................... 87
4.4.16
FP-@EMPF1 ...................................................................................... 87
