(GLWLRQ
6WDUWXS
Siemens AG 6SE8004-0BH76
SIMOVERT MV Commissioning Instructions
47
3OHDVHHVSHFLDOO\REVHUYHWKHIROORZLQJ
:
♦
Significant energy levels are saved in the drive converter DC link (capacitors).
♦
Hazardous voltages may be present in the drive converter for a somewhat
longer time after the equipment has been shut down.
♦
The discharge time of the DC link capacitors down to non-hazardous voltage
levels is less than 1 s as a result of the crowbar thyristor
always
FKHFN
that the
DC link bus is
YROWDJHIUHH
before touching it! Voltage can still be present as
long as the motor is rotating, e.g. for fault trips).
♦
The voltage DC link can also be charged through other components. Before
touching or coming into contact with live, components, it is
DEVROXWHO\
QHFHVVDU\
to check and ensure that they are in a
QRYROWDJHFRQGLWLRQ
.
♦
Understand how the drive converter is connected into the power-on and power-
off circuits.
♦
Please observe all of the information in this section and on the product itself.
If this information is not observed, death, severe bodily injury and significant
material damage could result.
&DXWLRQ
The electronic modules contact devices which can be destroyed by electrostatic
discharge. These components can be easily destroyed if they are incorrectly
handled. You should stand on an insulated (ESD compatible) surface, and ensure
that it is not grounded before you carry-out any work on the equipment.
4XDOLILHGSHUVRQQHO
Only qualified personnel may be involved in the configuring, engineering,
installation, start-up and operation of SIMOVERT MV drive converters and the
open-loop and closed-loop control.
1RWH
It is assumed that personnel have been trained in the handling of the digital
SIMADYN D control system.
The
6758&*
diagrams supplied with the equipment are
ELQGLQJ
for the function
and start-up of the drive converter.
