manualshive.com logo in svg

Siemens SIMATIC S5-95F, Manual

The Siemens SIMATIC S5-95F is a renowned programmable logic controller (PLC) offering robust automation capabilities. This compact and reliable device is accompanied by a comprehensive user manual, which can be freely downloaded from our website. Explore the full potential of this product with our detailed manual at manualshive.com.

Share
Download
background image

Figures

5-1

Installation of a Basic Unit with External I/Os

. . . . . . . . . . . . . . . . . . . . . .

5 - 1

5-2

Connecting the Bus Units

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 2

5-3

Coding System to Prevent an Inadvertent Interchange of Modules

. . . . . . .

5 - 3

5-4

Covering the Last Slot with Connector Cover 981-8MA11

. . . . . . . . . . . . .

5 - 4

5-5

Interconnecting Tiers with Interface Modules (6ES5 316-8MA12)

. . . . . . . .

5 - 5

5-6

Multi-Tier Configuration of a Subunit with the IM 316 Interface
Module (6ES5 316-8MA12)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 7

5-7

Cabinet Mounting with a Series of Devices and/or Cable Duct

. . . . . . . . . .

5 - 7

5-8

Vertical Mounting of a PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 8

5-9

Screw-Type Terminal for Power Supply Modules and Bus Units

. . . . . . . .

5 - 9

5-10

Installing a Crimp Snap-In Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 10

5-11

Disconnecting a Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 11

5-12

Example for Connection of Single-Channel, Failsafe Sensors to 
an External Digital Input Module

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 13

5-13

Example for Connection of Two-Channel Sensors to an External 
Digital Input

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 14

5-14

Example for Connection of the External Digital Output
Module with Direct P-M Control of the Actuator

. . . . . . . . . . . . . . . . . . . .

5 - 16

5-15

Example for Indirect Control of Actuators (one P output and
one M output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 17

5-16

Example for Connection of the External Digital Output
Module (twice P output)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 18

5-17

Connecting a Sensor to Channel 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 19

5-18

Connecting a Lamp to Channel 6

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 20

5-19

Front View of the Digital I/O Module with a Crimp Snap-In Connector
(simplified view and not true to scale)

. . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 21

5-20

Connecting a Sensor and a Lamp to Digital Input/Output Module 482

. . . . .

5 - 22

5-21

Simplified Representation of Electrical Potentials for the Basic Unit

. . . . . .

5 - 24

5-22

Simplified Representation of a Non-Floating, External I/O Connection

. . . . .

5 - 25

5-23

Simplified Representation of a Floating, External I/O Connection

. . . . . . . .

5 - 26

5-24

Grounded S5-95F Configuration 

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 27

5-25

Non-Grounded S5-95F Configuration 

. . . . . . . . . . . . . . . . . . . . . . . . . . .

5 - 28

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Tables

5-1

Pin Assignment for 450-8FAxx Digital Output Module

. . . . . . . . . . . . . . . .

5 - 15

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

EWA 4NEB 812 6210-02

Summary of Contents for SIMATIC S5-95F




































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SIMATIC S5-95F

J4C 20 Mounting Instructions preview
20
Brand: J4C Pages: 4
ABB ACH550 series Quick Start Manual preview
ACH550 series
Brand: ABB Pages: 6
ABB ACS355 series Quick Start Up Manual preview
ACS355 series
Brand: ABB Pages: 139
ABB ACH400 Series Retrofit Manual preview
ACH400 Series
Brand: ABB Pages: 28
ABB TZIDC-110 Operating Instructions Manual preview
TZIDC-110
Brand: ABB Pages: 59
Gardena 4030 Operator'S Manual preview
4030
Brand: Gardena Pages: 16
MADRIX STELLA Technical Manual & Quick Start Manual preview
STELLA
Brand: MADRIX Pages: 28
Kärcher K 3 How To Connect preview
K 3
Brand: Kärcher Pages: 4
IBM 5394 Manual preview
5394
Brand: IBM Pages: 38
NCR MSR Instructions Manual preview
MSR
Brand: NCR Pages: 8
Paradox Digiplex DGP-848 Reference And Installation Manual preview
Digiplex DGP-848
Brand: Paradox Pages: 20
Paradox PCS300 Reference And Installation Manual preview
PCS300
Brand: Paradox Pages: 32
RAKwireless RAK3172 User Manual preview
RAK3172
Brand: RAKwireless Pages: 6
VAT 264 Series Installation, Operating, & Maintenance Instructions preview
264 Series
Brand: VAT Pages: 26
SOMFY Situo 1 RTS Installation And Operating Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 112
Petique JG01500103 Instruction Manual preview
JG01500103
Brand: Petique Pages: 44
Vageo DT-CH Manual preview
DT-CH
Brand: Vageo Pages: 2
Waeco MagicSpeed Series Installation And Operating Manual preview
MagicSpeed Series
Brand: Waeco Pages: 76

Brands by name

Popular brands

Load more brands