manualshive.com logo in svg

Siemens SIMATIC S5-95F, Manual

The Siemens SIMATIC S5-95F is a renowned programmable logic controller (PLC) offering robust automation capabilities. This compact and reliable device is accompanied by a comprehensive user manual, which can be freely downloaded from our website. Explore the full potential of this product with our detailed manual at manualshive.com.

Share
Download
background image

S5-95F 

 S5-95F on SINEC L1

Example:

The S5-95F is to be a slave station and have the slave number 2 on the SINEC L1 bus.
Subunit A is interfaced to the L1 bus.

The following conditions apply to data transfer:

•

Coordination byte UVB is flag byte 10

•

Data is to be transmitted over data path 1 to slave 13 and 14

•

Data is to be received over data paths 1 and 2 from slaves 13 and 14

•

Slave 13 is an S5-115F programmable controller with CPU 942-7UF15 and slave 14 is an
S5-95F programmable controller

•

The SINEC L1 safety time is 3 seconds for all connections

•

If no valid frame can be received within the safety time, the S5-95F goes to STOP

Table 13-5.

Initializing the Interface for Failsafe Data Interchange

Parameter in

the Default

DB

Description

Value for the

Example

Permissible Values

SL1:

Block ID "SINEC L1"

—

—

PGN N

PG bus number
(required for executing
programmer functions over the
L1 bus; default value is NO)

PGN 1

PGN x

(x=1 to 30)

SLN N

Slave number
Default value is NO

SLN 2

SLN x

(x=1 to 30)

SL1S:

Block ID: "SINEC L1 failsafe"

—

—

UVB N

User Valid Byte

UVB MB 10

FY x

(x=0  to 255)

D1S N

Data path 1 (send) is physically
interfaced to subunit ...; default
value is NO.

D1S A

D1S k

k={N, A, B, H} where

N ˆ

=no

A ˆ

=subunit A

B ˆ

=subunit B

H ˆ

=subunits A and B

(high-availability

SINEC L1 bus)

D1E N

Data path 1 (receive) is physically
interfaced to subunit ...; default
value is NO.

D1E A

D1E k

D2S N

Data path 2 (send) is physically
interfaced to subunit ...; default
value is NO.

D2S A

D2S k

D2E N

Data path 2 (receive) is physically
interfaced to subunit ...; default
value is NO.

D2E A

D2E k

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

EWA 4NEB 812 6210-02

13-13

Summary of Contents for SIMATIC S5-95F




































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SIMATIC S5-95F

Bardiani BBZK Manual preview
BBZK
Brand: Bardiani Pages: 96
Eaton CDAU-01/04 Instruction Leaflet preview
CDAU-01/04
Brand: Eaton Pages: 4
DigiPower IPP-S Series Installation Manual preview
IPP-S Series
Brand: DigiPower Pages: 27
Aurora AU-A1ZBSCD Manual preview
AU-A1ZBSCD
Brand: Aurora Pages: 2
Tendercare Snappi Pushchair User Manual preview
Snappi Pushchair
Brand: Tendercare Pages: 76
Swagelok TBVS4 User Manual preview
TBVS4
Brand: Swagelok Pages: 16
Classic Smart 4 Universal User Instructions preview
Smart 4 Universal
Brand: Classic Pages: 12
Pilz PNOZ mi1p Operating Instructions Manual preview
PNOZ mi1p
Brand: Pilz Pages: 9
ccei MPZ Technical Instructions preview
MPZ
Brand: ccei Pages: 16
Barthelme Chromoflex Pro Series Instruction Manual preview
Chromoflex Pro Series
Brand: Barthelme Pages: 6
D+H VCD 203 Manual preview
VCD 203
Brand: D+H Pages: 16
CompuPro DISK 3 Technical Manual preview
DISK 3
Brand: CompuPro Pages: 33
Paradox MG-RCV3 Reference And Installation Manual preview
MG-RCV3
Brand: Paradox Pages: 28
Hansen H5600A Specifications, Applications, Service Instructions & Parts preview
H5600A
Brand: Hansen Pages: 4
Ebyte E31-433T30S User Manual preview
E31-433T30S
Brand: Ebyte Pages: 20
Energenie EG-PWC-PSWRC-01 User Manual preview
EG-PWC-PSWRC-01
Brand: Energenie Pages: 2
Viconics ZigBee Pro VT8000 Series Installation Manual preview
ZigBee Pro VT8000 Series
Brand: Viconics Pages: 3
Taco HAFC101 Wiring Manual preview
HAFC101
Brand: Taco Pages: 104

Brands by name

Popular brands

Load more brands