Module Spectrum
S5-95F
Digital Input/Output Module with LED Display (continued)
(6ES5 482-8MA13)
Output side
Number of outputs
16
Galvanic isolation
no
- in groups of
8
Load voltage L+
- rated value
24 V DC
- permissible range
20 to 30 V
(ripple included)
- value at t<0.5 s
35 V
Output current I
N
for ”1” signal
- rated value
500 mA
- permissible range
5 to 500 mA
Residual current
for ”0” signal
max.
0.5 mA
Short-circuit protection
yes
Short-circuit indication
red LED
Output voltage for
”1” signal
L+(- 0.6 V)
Voltage induced on circuit
interruption (internal)
limited to
- 15 V
Switching frequency with
- resistive load
100 Hz
- inductive load
2 Hz
Permissible total current
of the outputs
6 A
Driving of a digital input
possible
Paralleling of outputs
possible in pairs
- maximum current
(0.8×I
N
)
Current consumption
- from +9 V (CPU)
typ.
10 mA
- from L+ (without load)
typ.
100 mA
Lamp load
max.
5 W
EMC Characteristics for Use in S5-95F
Electrostatic discharge
to IEC 801-2
Severity rating 1
tested with
8 kV air discharge
2 kV contact discharge
Electromagnetic fields
to IEC 801-3
Severity rating 3
tested with
3 V / m
Fast transient burst
to IEC 801-4
Severity rating 2
tested with
1.2 kV on supply lines
1 kV on signal lines
Input side
Number of inputs
16
Galvanic isolation
no
- in groups of
16
Input voltage L+
- rated value
24 V DC
- for ”0” signal
0 to 5 V
- for ”1” signal
13 to 30 V
Input current
for ”1” signal
typ.
4.5 mA
Inherent delay
- from ”0” to ”1”
typ.
4 ms
- from ”1” to ”0”
typ.
3 ms
Fault LED (red)
indicates
interruption of
L+/M supply
Connection of
two-wire BERO
proximity switches
possible
- residual current
1.5 mA
Current consumption
- from +9 V (CPU)
typ.
50 mA
Technical Specifications
Cable length
- unshielded
100 m (330 ft.)
Rated insulation voltage
(+9 V to )
12 V AC
- insulation group
1 × B
Power loss of the
module
typ.
4.5 W
Weight
approx. 190 g (7 oz.)
A-18
EWA 4NEB 812 6210-02
