Siemens SIMATIC S5-95F, Manual

Page: 212 / 579

STEP 5 Operations S5-95F
8.1.8 Block Call Operations
Block call operations specify the sequence of a structured program. Table 8-8 provides an overview
of the block call operations. Examples follow the table.
Table 8-8. Overview of Block Call Operations
Operation Meaning
Jump unconditionally
Program scanning continues in a different block regardless of the
RLO.
The RLO is not affected.
Operand
JU
JC Jump conditionally
Program scanning jumps to a different block when the RLO is "1".
Otherwise program scanning continues in the same block.
The RLO is set to "1".
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Parameter
0 to 255
*
0 to 255
0 to 255
0 to 255
ID
OB
PB
FB
SB
C
BE Block end
The current block is terminated regardless of the RLO.
Program scanning continues in the block in which the call originated.
The RLO is “carried along” but not affected. BE is always the last
statement in a block.
BEU Block end, unconditional
The current block is terminated regardless of the RLO.
Program scanning continues in the block in which the call originated.
The RLO is “carried along” but not affected.
BEC Block end, conditional
When the RLO is “1”, the current block is terminated.
Program scanning continues in the block in which the call originated.
During the block change, the RLO remains “1”.
If the RLO is “0”, the operation is not executed.
The RLO is set to “1” and linear program scanning continues.
Call a data block
A data block is activated regardless of the RLO.
Program scanning is not interrupted.
The RLO is not affected.
Parameter
2 to 255 for C DB and 2 to 251, 255
***
for G DB
ID
DB
G Generate and delete a data block**
An area is set up in the RAM to store data regardless of the RLO.
* I
f using the PG 615, select “SYS. OPS. Y” in the presets menu. Also note that certain OBs are assigned
by the operating system.
** The length of the DB must be loaded into ACCU 1 before execution of the operation. A length of 0
makes the DB invalid.
*** Data blocks DB0 and DB1 are reserved for special functions.
8-32
EWA 4NEB 812 6210-02