Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual Download Page 126

Page: 126 / 196

Parameterizing the Mobile Panel

5.13 Functions for service and commissioning

TP1000F Mobile RO

126

Operating Instructions, 08/2017, A5E39831415-AA

To restore the delivery state of the HMI device and set all device parameters to their

default values, enable "Reset to factory settings".

10.

In the "Start Center" of the HMI device, click on the "Transfer" button.

11.

On the PC in ProSave, click on the "Update OS" button.
Follow the instructions in ProSave.

The operating system on the HMI device is updated. A status display shows the progress.
A message is displayed when the operating system update is successfully completed.

Result

You have successfully installed the operating system and the RemoteOperate Client

application on the HMI device.

Note
After restoring, a recalibration of the touch screen may be required.

Summary of Contents for SIMATIC HMI TP1000F Mobile RO





































































































































































































Search results

Summary of Contents for SIMATIC HMI TP1000F Mobile RO

Reviews:

Siemens SIMATIC HMI TP1000F Mobile RO, Operating Instructions Manual, Page: 126 / 196

Search results

Summary of Contents for SIMATIC HMI TP1000F Mobile RO

Reviews: