Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual Download Page 138

Page: 138 / 196

Using a client

6.2 Connect client

TP1000F Mobile RO

138

Operating Instructions, 08/2017, A5E39831415-AA

Note
The length of time you need to press the touch screen before the RemoteOperate toolbar is

displayed is defined in the "roServer.ini" file.

The special functions of the RemoteOperate toolbar are shown in the table below:

Buttons

Functions

Executes a right-click on the server.

Proceed as follows:
1.

Select a screen object which has a right-click function.

Touch the "Right-click" button.

Execute the desired function.

Opens the screen keyboard (only with the Windows CE operating system).

Operates the Windows button on the server.

Executes the <Ctrl+Alt+Del> shortcut on the server, e.g., to log onto the server.

Terminates the connection to the server.

Closes the RemoteOperate toolbar.

Opens the alarm window: Alarm is pending.

Button disabled: No alarm is pending.

Summary of Contents for SIMATIC HMI TP1000F Mobile RO





































































































































































































Search results

Summary of Contents for SIMATIC HMI TP1000F Mobile RO

Reviews:

Siemens SIMATIC HMI TP1000F Mobile RO, Operating Instructions Manual, Page: 138 / 196

Search results

Summary of Contents for SIMATIC HMI TP1000F Mobile RO

Reviews: