Parameterizing the Mobile Panel
5.13 Functions for service and commissioning
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
123
5.13.3
Backing up and restoring data (ProSave)
Requirements
●
The HMI device is connected to a PC by means of the connection box and Ethernet.
●
The ProSave application is installed on the PC. The ProSave software is located on the
"SIMATIC RemoteOperate - Applications & Documentation" CD.
●
The ProSave add-on with the information for the HMI device is installed on the PC. The
ProSave add-on is located on the "SIMATIC RemoteOperate -
Applications & Documentation" CD.
●
The data channel on the HMI device is configured.
●
The PC is switched on.
Procedure for backup
Proceed as follows:
1.
Start ProSave from the Windows Start menu on the PC.
2.
Select the "Device type" "TP1000F Mobile RO" in the "General" tab.
3.
Select "Ethernet" as the "Connection" between the HMI device and the PC.
4.
Enter the IP address or the name of the HMI device.
5.
Go to the "Backup" tab.
6.
Select the data to be backed up.
7.
Select a folder and file name for the "*.brf" backup file.
8.
In the "Start Center" of the HMI device, click on the "Transfer" button.
If automatic transfer mode is enabled on the HMI device, the HMI device automatically
sets "Transfer" mode during backup.
9.
On the PC in ProSave, click on the "Start Backup" button.
Follow the instructions in ProSave.
The data of the HMI device is backed up. A status display shows the progress.
The system outputs a message when backup is completed.
Result
You have backed up the selected HMI device data to the PC.