manualshive.com logo in svg

Siemens SICAM P 7KG7750, Manual, Page: 122 / 142

Share
Download
Siemens SICAM P 7KG7750 Manual Download Page 122

5 

5.12 Reading the Device Memory

122

Power Meter SICAM P 7KG7750/55, Manual

E50417-B1076-C340-A6, Edition 09.2013

Close

Click this button to terminate the dialog window 

Read memory

.

Export

Click this button to save measured values or information as CSV file (Comma separated values) 
or COMTRADE file (IEEE Standard Common Format for Transient Data Exchange). CSV files 
can be read and processed, e.g., with Excel. COMTRADE files are used for exchanging mea-
sured data as documented in the IEEE Std C37.111-1999. The standardization includes both the 
format for measuring files and the type of media used for the exchange of fault report, test or 
simulation data of power supply systems.

Delete memory area

Click this button to delete the selected memory area in the device. Optionally, you can restart the 
recording immediately or with the occurring of a parameterized trigger condition (mean values, 
power values, and limit violations only).

5.12.2

Charts / Diagrams

Diagrams and charts are coupled: By moving the measuring cursor in the diagram, the corre-
sponding row in the chart is marked; by activating a row in the chart, the cursor in the diagram 
moves to the corresponding timestamp (mean values, power values, and binary states only).

5.12.3

Diagrams

In diagrams, zooming, measuring and other functions are available. Click the right mouse button 
in diagrams to activate the functions zoom, optimize, optimize x-axis, optimize y-axis, diagrams 
(fade in or blind out diagram for measured value), signals (fade in or blind out diagram for mini-
mum, mean respectively maximum value) and copy diagrams in selectable size to the clipboard 
(mean values, power values, binary states, and oscilloscope data only).

5.12.4

Timestamps

All timestamps are shown in regional normal time. This avoids time gaps or overlap in data (for 
example, when summer time starts or ends).

5.12.5

Mean Value Record

Mean values are represented in a chart and in diagrams. In the chart, you can select between 
minimum values, mean values and maximum values in headline. For each recorded mean value 
(max. 8), one column in the chart and one diagram is shown. In the diagram, the mean value and 
the tolerance area limited by minimum and maximum value are drawn.

Summary of Contents for SICAM P 7KG7750















































































































































Reviews:

No comments