Frame Installation Instructions
Moveable Drawout Element
Installing the Moveable Drawout Element
The outline drawing of the moveable drawout element for
the 4000A frame is located on pages 76-77.
Carefully uncrate the moveable drawout element and re
move all packing material with the exception of the colored
tape holding the racking pump handle in place. Items such
as keys for the SB breaker with a key interlock accessory will
be taped to the top of the moveable drawout element. If the
moveable drawout element is secured to a pallet, remove
the securing device.
Preferred Lifting Arrangement
Attach the lifting device accessory as i llustrated. If l ifting
straps are used instead of the lifting device accessory, the
l ifting straps should go between the primary contacts. In
either of these arrangements, the moveable drawout ele
ment may be balanced as it is being lifted by a crane or
hoist. The moveable drawout element should not be lifted
Lift by using rear guide posts (one on left side and one on
right side).
Lift the moveable drawout element over the extension
rails. Align the moveable drawout element such that the
rollers straddle the rails. Carefully lower the moveable
drawout element onto the rails. Remove the lifting device.
Remove the tape holding the racking pump handle.
by the primary contacts.
Rollers and Rail
Pull out the extension rails on the stationary drawout ele-
ment until they hit a solid stop .
10
www
. ElectricalPartManuals
. com
