Siemens RMB795B Basic Documentation Download Page 19

Page: 19 / 144

19 / 144

Siemens

Central control unit RMB795B

CE1P3122en

Building Technologies

Operation

18.01.2012

2.2.3

Operating levels

There are 2 operating levels:

•

Info level

•

Setting level

These 2 levels are always available, no matter which access level is active.

Important plant data can be queried in this level.

The setting level is arranged in the form of a menu structure. It provides for reading
and adjustment of data points.
Using the

INFO

button, explanations relating to the menus with the individual data

points can be displayed. The information is displayed as long as the button is kept
depressed.

Switching from the info level to the setting level:
1. Select the start page by pressing the

ESC

button.

2. Press

the

knob to change to the setting level.

Switching from the setting level to the info level:
1. Select the start page with the

ESC

button. Press the button repeatedly until the

start page reappears.

2. Press

the

INFO

button to change to the info level.

2.2.4

Access levels

The RMB795B central control unit has 3 access levels. An access right is defined
for each parameter (operating line).

Level

Access

Symbol

User level (for the
plant operator)

The user level can be accessed any time.
Users can modify all data points that are
visible/adjustable at this level.

Service level
(for maintenance)

Press the

knob and the

ESC

button

simultaneously. Then, select operating line

Service

level

and confirm by pressing the

knob.

Password level
(for
commissioning)

Press the

knob and the

ESC

button

simultaneously; then select operating line

Password

level

and confirm by pressing the

knob.

Then, enter number

as the password and confirm

by pressing the

knob.

•

The access level determines which individual menus and operating lines are

activated.

•

A higher access level also shows the menus and operating lines for the lower

access levels

•

The levels use a shared menu as a basis The password level displays the entire

menu tree

•

After a time-out, the central control unit changes to the user level.

Time-out: If the central control unit is not operated for 30 minutes

Two operating levels

Info level

Setting level

Switching between the
operating levels

3 access levels

Common properties

Summary of Contents for RMB795B

















































































































































Search results

Summary of Contents for RMB795B

Reviews:

Brands by name

Popular brands

Siemens RMB795B, Basic Documentation

Search results

Summary of Contents for RMB795B

Reviews:

Brands by name

Popular brands