Siemens RDG200KN, Basic Documentation, Page: 117 / 150

Functions
Control parameters
4
A6V11545892_en--_a 117 | 150
Parameter Name Range Dependencies
Diagnostics and test
d01 Application number 0 = (No application)
1 = 2-pipe
2 = 2-pipe with electric heater
3 = 2-pipe with radiator
4 = 4-pipe
5 = 2-stage heating or cooling (2-pipe)
6 = 4-pipe with electric heater
7 = 2-stage heating and cooling (4-pipe)
8 = 4-pipe:6-port H/C (no fan)
9 = 4-pipe:6-port CO +PICV ‒
d02 X1 state "---" = Function not selected
0 = Not activated (for DI)
1 = Activated (DI)
0…49 °C = Current temp. value (for AI)
00 = H/C Input shorted
100 = H/C Input open
‒
d03 X2 state "---" = Function not selected
0 = Not activated (for DI)
1 = Activated (DI)
0…49 °C = Current temp. value (for AI)
00 = H/C Input shorted
100 = H/C Input open
‒
d04 U1 state "---" = Function not selected
0 = Not activated (for DI)
1 = Activated (DI)
2 = Activated (DC input)
3 = Activated (DC output)
0…49 °C = Current temp. value (for AI)
00 = H/C Input shorted
100 = H/C Input open
‒
d05
1)
Test mode for checking the Y1/Y3 actuator's running
direction 5)
"---" = No signal on outputs Y1 and Y3
OPE = Output Y1 forced opening
CLO = Output Y3 forced closing ‒
d06
1)
Test mode for checking the Y2/Y4 actuator's running
direction 5)
"---" = No signal on outputs Y2 and Y4
OPE = Output Y2 forced opening
CLO = Output Y4 forced closing ‒
d08 Test mode for checking the Q1 output (ex P400
function)
"---" = no signal at output Q1
OPE = output Q1 forced opening
CLO = output Q1 forced closing ‒
d09 Test mode for checking the Q2 output (ex P401
function)
"---" = no signal at output Q2
OPE = output Q2 forced opening
CLO = output Q2 forced closing ‒
d10 Test mode for checking the Q3 output (ex P403
function)
"---" = no signal at output Q3
OPE = output Q3 forced opening
CLO = output Q3 forced closing ‒
d14 Software version Ux.xx is displayed ‒
d15 Unit ID number (Serial number) Unit ID is displayed (Serial number) ‒
Note: Parameter display depends on selected application and function.
1)
When output type is 3-position/3-wire, d05 and d06 are visible.
Diagnostics and test