Siemens optiPoint 500 advance User Manual Download Page 4

Page: 4 / 127

Contents

Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Dialing with the handset off-hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
Dialing with the handset on-hook  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
Suppressing your number on called party’s display  . . . . . . . . . . . . . . .  25
Direct call to a colleague via loudspeaker (voice calling) . . . . . . . . . . . .  25
Entering commands with tone dialing (DTMF suffix dialing) . . . . . . . . .  26

Calling several persons simultaneously . . . . . . . . 27

Making a second call (consultation). . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
Alternating between two calls (toggling) . . . . . . . . . . . . . . . . . . . . . . . .  27
Setting up a conference
(Hicom 300 E/H – not used in US) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28

Setting up an add-on conference . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Expanding the conference to include up to eight members  . . . . . .  28
Chairing a conference  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  29
Disconnecting a user from the conference . . . . . . . . . . . . . . . . . . .  29
Handing over conference leadership . . . . . . . . . . . . . . . . . . . . . . . .  29

Station controlled conference (HiPath 4000) . . . . . . . . . . . . . . . . . . . . 30

Setting up a conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31
Expanding the conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
Transferring the conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  33
During the conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34

Transferring a call  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35
Using the switchover button (HiPath 4000). . . . . . . . . . . . . . . . . . . . . .  36
Re-indication (HiPath 4000) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  37

System-wide parking (HiPath 4000) . . . . . . . . . . . . 38

Parking a call automatically and taking it at a later date. . . . . . . . . . . . . 38

Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Taking a parked call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Parking a call manually and then taking it at a later date . . . . . . . . . . . . 39

Parking via the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39
Parking via a repertory key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  39
Parking via "system parking" (only telephones without a display)  . .  40
Taking a parked call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  40

Parking is not possible. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Automatic parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Manual parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Using saved numbers to make calls . . . . . . . . . . . 42

Using a call list (missed calls) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Viewing the call log  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42
Dialing a number from the call log . . . . . . . . . . . . . . . . . . . . . . . . . .  43
Deleting an entry from the call log. . . . . . . . . . . . . . . . . . . . . . . . . .  43

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands