Siemens optiPoint 500 advance User Manual Download

Page: 27 / 127

Calling several persons simultaneously

Step by Step

Calling several persons
simultaneously

Making a second call (consultation)

During a call in progress you can set up a second call,
for example, to obtain information. The first party is
placed on hold.

Confirm.

Make your call to the second party.

Release the second call – return to the first call:

Confirm.

Alternating between two calls
(toggling)

Precondition:

You have either made a second call (see

above) or taken a waiting call (

page 18) during a call

in progress.

To switch to the waiting party:

Select and confirm.

Select and confirm (used in US).

Release the present call – return to the other call:

Select and confirm.

Setting up a conference call:

Consultation?

Release and return?

Toggle/Connect?

Toggle?

Release and return?

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands