Siemens optiPoint 500 advance User Manual Download

Page: 34 / 127

Step by Step

Calling several persons simultaneously

During the conference

You are taking part in a conference with 3 to 8 members
and you wish to know about the other members or to
disconnect a member.

Viewing member information

Select and confirm.

The display shows the name and call number of the oth-
er member with lowest member number.

Confirm to display the next member.

Select and confirm to end the display.

Select and confirm to disconnect this member from the
conference. If there were only three members, the con-
ference is now ended and the call continues as a two-
party call.

Disconnecting the last member added

You wish to disconnect the last member added to the
conference.

Select and confirm. The last member added is discon-
nected. If there were only three members, the confer-
ence is now ended.

Putting the conference on hold

If line keys are installed (

page 91) you can put the

conference on hold and make a call on another line.

Press line key.

Select and confirm.

The conference will be put on hold. The following mes-
sage is displayed: 1st line: "Conference", 2nd line: "On
hold".

Press the line key on which the conference is being held
- you are reconnected to the conference.

View members? >

No. member No. 1

Next conference party? >

Stop viewing? >

Release party? >

Remove last party? >

Line

Hold?

Line

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands