Siemens optiPoint 500 advance User Manual Download

Page: 31 / 127

Calling several persons simultaneously

Step by Step

Setting up a conference

You can set up a conference from any of the following
types of connection:

•

single call

•

consultation call

•

waiting call

Starting a conference from a single call

You want to set up a conference.

You receive a call.

You call another user.

Select and confirm.

Call the second user.
Announce that a conference is to be set up.

Confirm.
You will receive the message "1 is your position".

This question will then be displayed.

Setting up a conference from a consultation call

You are connected to one user and call a second user.

Confirm.

Call the second user. The second user answers, you an-
nounce the conference.

Select and confirm.
You will receive the message "1 is your position".

Setting up a conference from a waiting call

You are connected to one user and receive another call.

An alerting tone is audible. The lamp flashes. Press the
key. You are connected to the waiting caller. The other
party is placed on hold.

Select and confirm.
You will receive the message "1 is your position". All
members are interconnected in a conference circuit.

Start conference?

Conference?

Conf.

1-2-3

Add on to conference?

Consultation?

Conference?

Call pickup

Conference?

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands