Siemens optiPoint 500 advance User Manual Download

Page: 58 / 127

Step by Step

Storing numbers, system functions and timed reminders

Saving individual speed dialing
numbers

You can save a number on each of digit keys 0 to 9 and
then dial these numbers at the push of a button
(

page 45).

Press the key. The lamp lights up.

Confirm.

Select and confirm.

Select and confirm (used in US).

Enter a specific speed dialing number (0 to 9 or 00 to 19
or 00 to 29).
If this digit has already been assigned a telephone num-
ber, this number is shown on the display.

Confirm.

Enter the number.
For external numbers, enter the access and then the
telephone number.

Confirm.

Saving a function on a key

Press the key. The lamp lights up.

Enter the service code.

Select and confirm.

and

Press the programmable function key. Keyset-configu-
ration is displayed.

Confirm.

Select and confirm one of the system functions prompted.

Confirm.

This can be also "00 to 19" or "00 to 29" for 20 or
30 individual speed numbers. These are referred
to as individual speed indexes.

program/service

Destinations?

Speed dialing?

Speed dialing features?

New entry?

Save?

program/service

Key function?

Change?

New function:

Save?

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands