Siemens optiPoint 500 advance User Manual Download

Page: 102 / 127

Step by Step

Making multiline calls

102

Cancelling the station fixed call forwarding
destination

Precondition:

The telephone is in the idle state. A sta-

tion fixed forwarding destination has been saved
(

page 101).

Only if it is

not

your primary line:

Press the line key for the required line.

Press the key. The lamp lights up.

for Hicom 300 E/H (not used in US)

Enter the service code.

Confirm.

Select and confirm.
If a fixed destination has been stored, it is displayed.

and

Select and confirm.

for HiPath 4000

The settings for station fixed forwarding for every line
are identical with the call forwarding function described
above. Therefore, for all further steps see

page 68.

Deactivating call forwarding for a line

Precondition:

The telephone is in the idle state. After a

line key has been pressed, an activated call forwarding
function is indicated on the display.

Only if it is

not

your primary line:

Press the line key for the required line.

With the call forwarding key:

Press the key. The lamp goes out.

Via the program/service key:

Press the key. The lamp lights up.

Enter the service code.

Select and confirm.

Line

program/service

Destinations?

Fixed call forw.?

Delete?

Line

Call forwarding

program/service

Feature settings?

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands