Siemens optiPoint 500 advance User Manual Download

Page: 36 / 127

Step by Step

Calling several persons simultaneously

Using the switchover button
(HiPath 4000)

The switchover button that must be configured by your
system administrator can be used for the following
functions:
•

consultation (return to the call being held or the con-
ference being held)

•

toggling

•

accepting a waiting call

•

accepting a group call

Waiting call

You hear a call-waiting tone. Information about the call
appears in the display.

Press the flashing key to accept the waiting call. The
lamp is on.

Toggling

You are connected to two users. One user is waiting.
The switchover lamp is on

Press the key to switch over to the other user. The first
user waits.

Consultation

You call a second user. The second user does not an-
swer

Press the key to return to the waiting user or the waiting
conference.

Group call

You are connected to a single user. A group call is sig-
nalled. Information about the group call appears in the
display.

Press the flashing key to accept the group call. The first
user is placed on hold. The lamp is on.

Switchover

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands