Siemens optiPoint 500 advance User Manual Download Page 94

Page: 94 / 127

Step by Step

Making multiline calls

Activating/deactivating ringer

When you are making a call on a line, you may be dis-
turbed by the ringing signals for other incoming calls. If
ringer cutoff has been configured, your telephone does
not ring. Incoming calls are then signalled by the flash-
ing of the line keys.

With the Ringer Cutoff key configured:

To activate ringer cutoff:

Press the key. The lamp lights up.
The telephone does

not

ring for incoming calls.

To deactivate ringer cutoff:

Press the key. The lamp goes out.
The telephone rings for incoming calls.

Via the program/service key:

Press the key. The lamp lights up.

Enter the service code.

Select and confirm.

and

Confirm.

Ringer cutoff

program/service

Feature settings?

Ringer cutoff?

Deactivate?

Activate?

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands