Siemens optiPoint 500 advance User Manual Download

Page: 82 / 127

Step by Step

Using a different telephone in the same way as your own

Select and confirm.
If you have several PINs and wish to use another one,
select the other PIN.

With the display "Enter station no." or "Enter ID", you are
requested to enter the PIN.

Entering the PIN for your own HiPath 4000 or
Hicom 300 E/H

(

not used in US

)

system:

Enter internal PIN.

Entering the PIN for another HiPath 4000 or
Hicom 300 E/H

(

not used in US

)

system area within

the integrated network:

Enter the 2-digit node code for your own HiPath 4000 or
Hicom 300 E/H

(not used in US) system (ask your sys-

tem administrator).

Enter your own number and press the pound key.

Enter the network-wide PIN and press the pound key.

Dialing after (successful) identification:

You hear a dial tone. The following appears on the dis-
play: "please dial".

Press the key. The lamp goes out.

Enter a number immediately.

Call forwarding – follow me after successful
identification

Select and confirm.

Confirm. Call forwarding has been activated.

PIN 1?

Enter the code!

Speaker

Variable call forw.?

Save?

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands