Siemens optiPoint 500 advance User Manual Download

Page: 29 / 127

Calling several persons simultaneously

Step by Step

Chairing a conference

If you are the user who set up the conference, then you
are also the conference leader. Only the conference
leader can expand the conference, disconnect mem-
bers from the conference or hand over leadership to an-
other conference member.

Each member of the conference is assigned a consecu-
tive number on the display. The conference leader al-
ways has the number "1".

Disconnecting a user from the conference

;

Enter the consecutive number of the conference mem-
ber.
The number (and possibly also the name) of the confer-
ee is displayed.

Confirm.

Handing over conference leadership

;

Enter the consecutive number of the conference mem-
ber.
The number (and possibly also the name) of the mem-
ber is displayed.

Select and confirm.
You have been disconnected from the conference.

Replace the handset.

Conf. 1-2-3-4

Consultation?

Release partner?

Transfer conference?

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands