Siemens optiPoint 500 advance User Manual Download Page 24

Page: 24 / 127

Step by Step

Making calls

Dialing with the handset off-hook

Lift the handset.

Internal: Enter the number.
External: Enter the access code and the number.

The called party is busy or does not answer:

Replace the handset.

Dialing with the handset on-hook

Internal: Enter the number.
External: Enter the access code and the number.

The called party answers. The call is on your speaker:

Lift the handset.

When handset is on-hook: speakerphone (This function
is not availiable for the optiPoint 500 economy/basic).

The called party is busy or does not answer:

Press the key. The lamp goes out.

Speaker

Summary of Contents for optiPoint 500 advance
































































































































Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands

Siemens optiPoint 500 advance, User Manual

Search results

Summary of Contents for optiPoint 500 advance

Reviews:

Related manuals for optiPoint 500 advance

Brands by name

Popular brands