Siemens optiPoint 300 basic, Operation And Andministration Manual

Page: 40 / 90

Operation
40
Customising the ringer
The sound produced by the ringer can be customised to give you
the desired loudness, tune and sequence. You can choose the
loudness and tune of the ringer amongst eight possible settings,
and select the desired sequence out of three possible sequences.
("Nil" is not an option for any of these settings.)
The three parameters are identified in the display by a prefixed let-
ter:
L for loudness, t for tune, and 5 for sequence. The current set-
ting is displayed (its value corresponding to the length of the
dashed line shown), and the ringer will sound so that you can hear
what the setting corresponds to. Press
j
to accept the setting of
the current parameter and move on to the next. To confirm your
changes and exit, press
?
.
Changing ringer loudness
12 – 03 – 00 12 – 34
Idle mode
Service
Press special function key
"Service" to change to
service mode
– – – – – –
Do not enter PIN
j
Enter Programming mode
L >>>_____
Current loudness setting
+
or
-
L >>>>>_ _ _
Loudness setting chang-
es (ringer will sound)
j
Save changes and move
to tune parameter