Siemens optiPoint 300 basic, Operation And Andministration Manual

Page: 47 / 90

Configuration and administration
47
Configuration
You can modify basic settings of the unit, such as the format used
to display date/time information and the dialling technique used.
Country setting
Choose a country code to automatically adopt the correct date/
time display format and dialling parameters.
The table on page 81 gives a list of the possible country codes.
DTMF dialling
Choose the correct dialling method here.
There are two dialling methods available:
1 = Inband
2 = Outband
If you have selected 2, the symbol will be displayed.
5F – _
Service mode
5F – 101
Select country setting
?
Confirm
5F – 101 01
Change country setting
?
Save change
5F – _
Service mode
5F – 102
Select dialling method
setting
?
Confirm
5F – 102 2
Change dialling method
?
Save change