Siemens optiPoint 300 basic Operation And Andministration Manual Download Page 30

Page: 30 / 90

Operation

Terminating a connection

Ending a call

If you end the call, your optiPoint 300 basic will return to idle mode,
showing the appropriate display. If a second call is on offer due to
call-waiting, you will hear the ringer.

●

To end a call, replace the handset.

Your caller hangs up

– If your caller hangs up before you have had a chance to pick

up the handset, the telephone will go into idle mode.

– If your caller hangs up while you are on the line, you will hear

a busy signal. The telephone will then return to idle mode.

– If a second call is on background hold when the current con-

nection is ended, you will be returned to that call.

Summary of Contents for optiPoint 300 basic



























































































Search results

Summary of Contents for optiPoint 300 basic

Reviews:

Related manuals for optiPoint 300 basic

Brands by name

Popular brands

Siemens optiPoint 300 basic, Operation And Andministration Manual

Search results

Summary of Contents for optiPoint 300 basic

Reviews:

Related manuals for optiPoint 300 basic

Brands by name

Popular brands